Inspired by the venerable and popular Fubarino SD, the chipKIT Pro MZ is the first of a series of Pro boards developed by Majenko Technologies.
Boasting a PIC32MZ MCU with 2MB of flash, 512kB of SRAM and a meaty FPU (all running at 200MHz) this fully USB-enable board is the perfect drop-in replacement for the Fubarino SD when you need that little bit extra power.
The advanced switching DC-DC regulator provides up to 3A (when supplied with 12V or more) from the 3.3V pins for even the most demanding of power requirements.
A Micro SDHC card slot gives you all the storage expansion you could ask for.
A new HID bootloader means you don't need to install any drivers to get up and running. A single press of RESET is all that is needed to activate the bootloader: no messing around with multiple buttons.
chipKIT's industry-leading USB stack gives you the ultimate in flexibility for communication with a PC. Everything from CDC/ACM, HID devices like Keyboard, Mouse and Joystick, mass storage devices (MSD) and much more allows you to create your perfect USB device.
And what's more, it drops straight into a breadboard. Or solders directly to strip- or matrix-board.
Comes supplied with two male header strips (not attached).
Specifications for chipKIT® Pro MZ
| Microcontroller | PIC32MZ2048EFG064 |
| Flash | 2MiB |
| SRAM | 512KiB |
| Frequency | 200MHz |
| GPIO | 44 |
| Analogue Inputs | 15 |
| PWM Outputs | 5 |
| Interrupt Inputs | 5 |
| SPI Ports | 2 |
| I2C Ports | 2 |
| Power Input (USB) | 5V |
| IO Voltage | 3.3V |
| UARTs | 2 |
| Power Input (Header) | 5V - 15V |
| 3.3V Output Current | 3A |
| Storage | Micro SD |
| Form Factor | Breadboard |